Alternateur A.R.K164A

A.R.K164A Alternateur – Alternateur Compact Sans Balais Haute Efficacité pour Applications Industrielles

L’A.R.K164A est un alternateur synchrone triphasé sans balais, compact et haute performance, conçu pour les petits et moyens groupes électrogènes. Auto-excité avec régulation AVR, il assure une stabilité de tension ±1 %, un THD < 5 % et un rendement jusqu’à 78 %. Avec classe H, IP23 et roulements graissés à vie, il est idéal pour les applications prime, location, télécom, mobile, ferroviaire et secours.

Demander un devis

Alternator Model

A.R.K164A

50Hz (kVA)

8.1

60Hz (kVA)

10.2
Système d’excitation SELF EXCITED
A.V.R. OPTIONAL SX440
Régulation de tension à régime établi ± 1.0 %
Court-circuit prolongé >300% OF RATED CURRENT
Facteur de puissance nominal0.8

Electrical Performance

  • Type: Three-phase, brushless, self-excited synchronous alternator

  • Frequency: 50 / 60 Hz

  • Power Factor: 0.8

  • Voltage Range: 190–480 V (configurable in star, delta, or parallel star)

  • Voltage Regulation: ±1.0%

  • Total Harmonic Distortion (THD): <5% (balanced load), <1.5% (no-load)

  • Sustained Short Circuit Current: >300% rated current

  • Efficiency: 73.8–78.0% (depending on load and frequency)

  • Telephone Harmonic Factor (THF): <2%

  • Telephone Interference Factor (TIF): <50

  • Power Ratings (Winding 311):

    • 50 Hz: 6.0–9.6 kVA

    • 60 Hz: 6.8–10.4 kVA

  • Voltage Combinations:

    • 50 Hz: 380/220, 400/231, 415/240, 440/254

    • 60 Hz: 416/240, 440/254, 460/266, 480/277

  • Short Circuit Ratio (1/Xd): 6.2–8.9 typical

Reactances (Per Unit at Rated kVA)

  • Xd (Synchronous): 1.89–2.06

  • X’d (Transient): 0.17–0.24

  • X’’d (Subtransient): 0.12–0.15

  • Xq (Quadrature): 0.83–1.18

  • X’’q (Quadrature Subtransient): 0.19–0.27

  • X₂ (Negative Sequence): 0.16–0.23

  • X₀ (Zero Sequence): 0.06–0.10

  • Leakage Reactance (XL): 0.07–0.09

  • Time Constants:

    • Transient (T’d): 0.25 s

    • Subtransient (T’’d): 0.012 s

    • Armature (Ta): 0.0045 s

    • Open Circuit Field (T’do): 0.0035 s

Construction & Design

  • Insulation Class: H (125°C rise at 40°C ambient)

  • Protection: IP23

  • Cooling: Self-ventilated air cooling

    • 50 Hz: 0.071 m³/s (150 cfm)

    • 60 Hz: 0.09 m³/s (191 cfm)

  • Frame: Robust steel structure with cast aluminum front and rear covers

  • Stator: Double-layer winding, 2/3 pitch to eliminate triple harmonics (3rd, 9th, 15th, etc.)

  • Rotor: Damped rotor with dynamic balance (BS6861 standard)

  • Bearings:

    • Drive End: 6309-2RS (ISO)

    • Non-Drive End: 6306-2RS (ISO)

    • Type: Sealed-for-life, non-maintenance ball bearings

  • Overspeed Capability: 120% of rated speed (2250 rpm)

  • Leads: 12 reconnectable leads (star, delta, or parallel star)

  • Winding Resistance:

    • Stator: 1.62 Ω/phase (22°C, star connection)

    • Rotor: 0.44 Ω (22°C)

  • Rotor Inertia (WR²): 0.0923 kg·m²

Dimensions & Weight

  • Rotor Weight: 22.5 kg

  • Stator Weight: 25.6 kg

  • Complete Alternator Weight: 88–101 kg (depending on bearing configuration)

  • Shipping Weight (Crated): 91–101 kg

  • Packing Dimensions: 64 × 54 × 72 cm

Regulation & Control

  • Excitation System: Self-excited

  • AVR Models: SX460 (standard), SX440 (optional), AS440 / MX341 / MX321 (optional)

  • Voltage Regulation Accuracy: ±1.0%

  • Parallel Operation: Supported (AVR-dependent)

  • Protection Features:

    • Stator winding and bearing overheat protection

    • Anti-condensation heater (optional)

    • Low-speed voltage drop protection

  • RFI Suppression: Complies with BS EN 61000-6-2 & BS EN 61000-6-4, VDE 0875G/N

  • Standards Compliance: IEC60034, GB755, BS5000, NEMA MG1-22, CSA C22.2-100, AS1359

  • Certification: ISO9001 Quality Management System

Environmental Parameters

  • Operating Temperature: –15°C to +40°C

  • Relative Humidity: Up to 95% (non-condensing)

  • Altitude: Up to 1000 m without derating

  • Cooling Air Requirement: 0.071–0.09 m³/s depending on frequency

  • Noise & Vibration: Meets BS6861 mechanical balance standards

Performance Summary

  • Efficiency Range: 73.8–78.0%

  • Voltage Dip (Transient Load): ≤25% at 0.8 PF

  • Recovery Time: <0.5 seconds

  • Locked Rotor Motor Starting: >300% rated current

  • Applications: Prime power, standby, rental, telecom, mobile, lighting tower, refrigeration, and railway generator systems

Datasheet

Download

Produits associés