Alternateur A.R.K7G

A.R.K7G Alternateur – Alternateur Heavy-Duty Sans Balais à Excitation PMG

L’A.R.K7G est un alternateur synchrone triphasé sans balais à excitation PMG, équipé d’un AVR MX321 pour une stabilité de tension supérieure et un excellent comportement transitoire. Il assure une régulation ±1 %, un THD < 5 % et un rendement jusqu’à 96,6 %, délivrant une puissance fiable et constante pour les applications industrielles, de location et standby. Avec classe H, IP23 et roulements graissés à vie, il offre une longue durée de service et une haute fiabilité.

Demander un devis

Alternator Model

A.R.K7G

50Hz (kVA)

1825

60Hz (kVA)

2163
Système d’excitation SELF EXCITED
A.V.R. MX341 WITH PMG
Régulation de tension à régime établi± 1.0 %
Court-circuit prolongé >300% OF RATED CURRENT
Facteur de puissance nominal0.8

Electrical Performance

  • Type: Three-phase, brushless, PMG-excited synchronous alternator

  • Frequency: 50 / 60 Hz

  • Power Factor: 0.8

  • Voltage Range: 380/220V – 480/277V (configurable in star, delta, or parallel star)

  • Voltage Regulation: ±1.0%

  • Total Harmonic Distortion (THD): <5% (balanced linear load), <1.5% (no-load)

  • Sustained Short Circuit Current: >300% rated current for 10 seconds

  • Efficiency: Up to 96.6% (depending on frequency and load)

  • Overload Capacity: 110% for one hour in a six-hour cycle

  • Telephone Harmonic Factor (THF): <2%

  • Telephone Interference Factor (TIF): <50

  • Short Circuit Ratio (1/Xd): 0.17 typical

  • Power Ratings (Winding 311):

    • 50 Hz: 1340–1700 kVA (Efficiency 96.3–96.6%)

    • 60 Hz: 1520–2163 kVA (Efficiency 96.1–96.5%)

  • Reactances (Per Unit at Rated kVA):

    • Xd (Synchronous): 2.02–3.29

    • X’d (Transient): 0.21–0.33

    • X’’d (Subtransient): 0.07–0.08

    • Xq (Quadrature): 1.90–3.08

    • X’’q (Quadrature Subtransient): 0.20–0.24

    • X₂ (Negative Sequence): 0.16–0.17

    • X₀ (Zero Sequence): 0.12–0.14

    • Leakage Reactance (XL): 0.02–0.03

  • Time Constants:

    • Transient (T’d): 0.33 s

    • Subtransient (T’’d): 0.03 s

    • Armature (Ta): 0.03 s

    • Open Circuit Field (T’do): 3.41 s

Construction & Design

  • Insulation Class: H (125°C rise at 40°C ambient)

  • Protection: IP23 (optional IP44 with 5–10% derating)

  • Cooling: Self-ventilated air cooling system

    • 50 Hz: 2.64 m³/s (5600 cfm)

    • 60 Hz: 3.17 m³/s (6720 cfm)

  • Frame: Rigid steel structure with cast aluminum front and rear covers

  • Stator: Double-layer winding, 2/3 pitch design eliminates triple harmonics

  • Rotor: Damped rotor dynamically balanced to BS6861 standards

  • Bearings:

    • Drive End: 6319 (ISO standard, sealed-for-life ball bearing)

    • Non-Drive End: 6228 (ISO standard, sealed-for-life ball bearing)

  • Overspeed Capability: 120% of rated speed (2250 rpm)

  • Leads: 12 reconnectable leads for star, delta, or parallel star configuration

  • Inertia (WR²): 44.59–45.59 kg·m²

  • Winding Resistance:

    • Stator: 0.00093 Ω/phase (22°C, star connection)

    • Rotor: 1.65 Ω (22°C)

Dimensions & Weight

  • Rotor Weight: 1431–1494 kg

  • Stator Weight: 1852 kg

  • Complete Alternator Weight: 3541–3704 kg

  • Shipping Weight (Crated): 3614–3704 kg

  • Packing Dimensions: 216 × 105 × 154 cm

Regulation & Control

  • Excitation System: PMG excitation with brushless AVR

  • AVR Models: MX321 (standard), MX341, SX460, SX440, AS440 (optional)

  • Voltage Regulation Accuracy: ±1.0%

  • Parallel Operation: Supported (AVR-dependent)

  • Protection Features:

    • Stator winding and bearing overheat protection

    • Anti-condensation heater (optional)

    • Low-speed voltage drop protection

  • RFI Suppression: Complies with BS EN 61000-6-2 & BS EN 61000-6-4, VDE 0875G/N

  • Standards Compliance: IEC60034, GB755, BS5000, NEMA MG1-22, CSA C22.2-100, AS1359

  • Certification: ISO9001 Quality Management System

Environmental Parameters

  • Operating Temperature: –15°C to +40°C

  • Relative Humidity: Up to 95% (non-condensing)

  • Altitude: Up to 1000 m without derating

  • Cooling Air Requirement: 2.64–3.17 m³/s depending on frequency

  • Noise & Vibration: Dynamically balanced per BS6861 mechanical standards

Performance Summary

  • Efficiency Range: 96.1–96.6%

  • Voltage Dip (Transient Load): ≤25% at 0.8 PF

  • Recovery Time: <0.5 seconds

  • Locked Rotor Motor Starting: >300% rated current

  • Applications: Prime power, standby, rental, telecom, mobile, refrigeration, lighting tower, and railway generator systems

Datasheet

Download

Produits associés