Alternateur A.R.K7H

A.R.K7H Alternateur – Alternateur Industriel Sans Balais à Excitation PMG Haute Performance

L’A.R.K7H est un alternateur synchrone triphasé sans balais à excitation PMG avec AVR MX341/MX321, offrant une stabilité de tension exceptionnelle et une récupération transitoire rapide. Avec ±1 % de régulation, un THD < 5 % et un rendement jusqu’à 96,9 %, il fournit une énergie propre et fiable pour les applications industrielles, télécom et secours. Sa classe H, IP23 et roulements étanches garantissent une grande durabilité et une maintenance minimale.

Demander un devis

Alternator Model

A.R.K7H

50Hz (kVA)

2000

60Hz (kVA)

2375
Système d’excitation SELF EXCITED
A.V.R.MX341 WITH PMG
Régulation de tension à régime établi± 1.0 %
Court-circuit prolongé >300% OF RATED CURRENT
Facteur de puissance nominal 0.8

Electrical Performance

  • Type: Three-phase, brushless, PMG-excited synchronous alternator

  • Frequency: 50 / 60 Hz

  • Power Factor: 0.8

  • Voltage Range: 380/220V – 480/277V (reconnectable in star, delta, or parallel star)

  • Voltage Regulation: ±1.0%

  • Total Harmonic Distortion (THD): <5% (balanced load), <1.5% (no-load)

  • Sustained Short Circuit Current: >300% rated current for 10 seconds

  • Efficiency: 96.3–96.9% (depending on frequency and load)

  • Overload Capacity: 110% for one hour in a six-hour period

  • Telephone Harmonic Factor (THF): <2%

  • Telephone Interference Factor (TIF): <50

  • Short Circuit Ratio (1/Xd): 0.06 typical

  • Reactances (Per Unit at Rated kVA):

    • Xd (Synchronous): 2.20

    • X’d (Transient): 0.18

    • X’’d (Subtransient): 0.08

    • Xq (Quadrature): 1.96

    • X’’q (Quadrature Subtransient): 0.24

    • X₂ (Negative Sequence): 0.14–0.16

    • X₀ (Zero Sequence): 0.03–0.04

    • Leakage Reactance (XL): 0.03

  • Time Constants:

    • Transient (T’d): 0.33 s

    • Subtransient (T’’d): 0.08 s

    • Armature (Ta): 0.05 s

    • Open Circuit Field (T’do): 3.49 s

Construction & Design

  • Insulation Class: H (125°C rise at 40°C ambient)

  • Protection: IP23 (optional IP44 with 5–10% derating)

  • Cooling: Self-ventilated air cooling

    • 50 Hz: 2.64 m³/s (5600 cfm)

    • 60 Hz: 3.17 m³/s (6720 cfm)

  • Frame: Rigid steel structure with cast aluminum covers

  • Stator: Double-layer winding, 2/3 pitch eliminates 3rd, 9th, and 15th harmonics

  • Rotor: Damped rotor dynamically balanced per BS6861 standards

  • Bearings:

    • Drive End: 6319 (ISO standard, sealed-for-life ball bearing)

    • Non-Drive End: 6228 (ISO standard, sealed-for-life ball bearing)

  • Overspeed Capability: 120% of rated speed (2250 rpm)

  • Leads: 12 reconnectable leads (star, delta, or parallel star configuration)

  • Inertia (WR²): 49.806 kg·m²

  • Winding Resistance:

    • Stator: 0.00076 Ω/phase (22°C, star connection)

    • Rotor: 1.77 Ω (22°C)

Dimensions & Weight

  • Rotor Weight: 1590 kg

  • Stator Weight: 1976 kg

  • Complete Alternator Weight: 3854 kg

  • Shipping Weight (Crated): 3781 kg

  • Packing Dimensions: 216 × 105 × 154 cm

Regulation & Control

  • Excitation System: PMG excitation with brushless AVR

  • AVR Models: MX341 / MX321 (standard), SX440, SX460, AS440 (optional)

  • Voltage Regulation Accuracy: ±1.0%

  • Parallel Operation: Supported (AVR-dependent)

  • Protection Features:

    • Stator winding and bearing overheat protection

    • Anti-condensation heater (optional)

    • Low-speed voltage drop protection

  • RFI Suppression: Complies with BS EN 61000-6-2 & BS EN 61000-6-4, VDE 0875G/N

  • Standards Compliance: IEC60034, GB755, BS5000, NEMA MG1-22, CSA C22.2-100, AS1359

  • Certification: ISO9001 Quality Management System

Environmental Parameters

  • Operating Temperature: –15°C to +40°C

  • Relative Humidity: Up to 95% (non-condensing)

  • Altitude: Up to 1000 m without derating

  • Cooling Air Requirement: 2.64–3.17 m³/s depending on frequency

  • Noise & Vibration: Dynamically balanced per BS6861 mechanical standards

Performance Summary

  • Efficiency Range: 96.3–96.9%

  • Voltage Dip (Transient Load): ≤25% at 0.8 PF

  • Recovery Time: <0.5 seconds

  • Locked Rotor Motor Starting: >300% rated current

  • Applications: Prime power, standby, rental, telecom, mobile, lighting tower, refrigeration, and railway generator systems

Datasheet

Download

Produits associés