Alternator A.R.K4ES

A.R.K4ES Alternator – High-Efficiency, Brushless, and Reliable Industrial Power Generation

The A.R.K4ES alternator, designed by Arken Power Solutions, is a high-efficiency three-phase, brushless synchronous alternator engineered for industrial, rental, and standby applications. It delivers consistent and stable voltage output with ±1% regulation and less than 5% total harmonic distortion (THD). Equipped with a PMG excitation system and MX341 AVR controller, the A.R.K4ES ensures reliable voltage stability even under transient load conditions. Built with Class H insulation, IP23 protection, and a rigid steel frame, it achieves efficiency levels up to 94.3%, providing dependable performance for demanding environments. Fully compliant with IEC60034, BS5000, NEMA MG1-22, and ISO9001 standards, it guarantees long service life and superior power quality.

GET A QUOTE

Alternator Model

A.R.K4ES

50Hz (kVA)

313

60Hz (kVA)

394
Control SystemSELF EXCITED
A.V.R. MX341 WITH PMG
Voltage Regulation ± 1.0 %
Sustained Short Circuit >300% OF RATED CURRENT
Rated Power Factor0.8

Electrical Performance

  • Type: Three-phase, brushless, self-excited synchronous alternator

  • Frequency: 50 / 60 Hz

  • Power Factor: 0.8

  • Rated Voltage: 380/220V – 480/277V (configurable in star, delta, or parallel star)

  • Voltage Regulation: ±1.0%

  • Total Harmonic Distortion (THD): <5% (linear load), <1.5% (no load)

  • Efficiency: Up to 94.3%

  • Sustained Short Circuit Current: >300% rated current for 10 seconds

  • Overload Capacity: 110% for one hour in six-hour cycles

  • Telephone Harmonic Factor (THF): <2%

  • Telephone Interference Factor (TIF): <50

  • Short Circuit Ratio (1/Xd): 0.09 typical

  • Reactances:

    • Xd: 2.79–3.33

    • X’d: 0.14–0.20

    • X’’d: 0.10–0.14

    • Xq: 2.01–2.80

    • X’’q: 0.25–0.39

  • Time Constants:

    • Transient (T’d): 0.08 s

    • Subtransient (T’’d): 0.019 s

    • Armature (Ta): 0.018 s

Construction & Design

  • Insulation Class: H (125°C rise at 40°C ambient)

  • Protection: IP23

  • Cooling System: Self-ventilated air flow (0.486 m³/s @50Hz, 0.580 m³/s @60Hz)

  • Frame Material: High-strength steel structure with cast aluminum front and rear covers

  • Winding: Double-layer stator winding, 2/3 pitch design to minimize harmonic distortion

  • Rotor Type: Damped rotor with high mechanical balance

  • Bearings:

    • Drive End: 6317 (sealed-for-life ball bearing)

    • Non-Drive End: 6314 (sealed-for-life ball bearing)

  • Overspeed Capability: 120% of rated speed (2250 rpm)

  • Leads: 12 reconnectable leads (star, delta, parallel)

  • Moment of Inertia (WR²):

    • Single Bearing: 4.63 kg·m²

    • Double Bearing: 4.43 kg·m²

  • Weight:

    • Complete Alternator: 1024–1030 kg

    • Stator: 470 kg

    • Rotor: 377–400 kg

Regulation & Control

  • Excitation System: Brushless, self-excited with PMG excitation

  • AVR Model: MX341 (standard with PMG), optional SX460, SX440, AS440, MX321

  • Voltage Regulation Accuracy: ±1.0%

  • Parallel Operation: Supported (with appropriate AVR)

  • RFI Suppression: Complies with BS EN 61000-6-2 and BS EN 61000-6-4, VDE 0875G/N standards

  • Low-Speed Voltage Drop Protection: Standard feature

  • Standards Compliance: IEC60034, GB755, BS5000, NEMA MG1-22, CSA C22.2-100, AS1359

  • Certification: ISO9001 quality assurance

Environmental Parameters

  • Operating Temperature: –15°C to +40°C

  • Relative Humidity: Up to 95% (non-condensing)

  • Altitude: Up to 1000 m without derating

  • Noise & Vibration: Balanced to BS6861 standards

  • Cooling Air Requirement: 0.486 m³/s @50Hz, 0.580 m³/s @60Hz

Performance Summary

  • Voltage Dip (Transient Load): ≤25% at 0.8 PF

  • Recovery Time: <0.5 seconds

  • Locked Rotor Motor Starting: >300% of rated current

  • Efficiency Range: 93.3–94.3% across load range

  • Applications: Prime power, standby, telecom, rental, refrigeration, mobile power stations, and railway systems

Datasheet

Download

Related Products