Alternator A.R.K7J

A.R.K7J Alternator – PMG Excited, Brushless, and High-Efficiency Industrial Alternator

The A.R.K7J alternator, designed by Arken Power Solutions, is a high-efficiency, three-phase brushless synchronous alternator equipped with PMG excitation and MX341 or MX321 AVR for precise voltage regulation and fast transient response. With ±1% voltage regulation, THD below 5%, and efficiency up to 96.3%, it ensures stable, clean power suitable for industrial, rental, and standby generator systems. Built with Class H insulation, IP23 protection, and sealed-for-life bearings, the A.R.K7J delivers long-lasting reliability, low maintenance, and superior mechanical strength. Fully compliant with IEC60034, BS5000, NEMA MG1-22, CSA C22.2-100, and ISO9001, it guarantees dependable performance for professional-grade power generation.

GET A QUOTE

Alternator Model

A.R.K7J

50Hz (kVA)

2150

60Hz (kVA)

2406
Control System SELF EXCITED
A.V.R. MX341 WITH PMG
Voltage Regulation ± 1.0 %
Sustained Short Circuit >300% OF RATED CURRENT
Rated Power Factor0.8

Electrical Performance

  • Type: Three-phase, brushless synchronous alternator with PMG excitation

  • Frequency: 50 / 60 Hz

  • Power Factor: 0.8

  • Voltage Range: 380/220V – 480/277V (reconnectable in star, delta, or parallel star)

  • Voltage Regulation: ±1.0%

  • Total Harmonic Distortion (THD): <5% (balanced load), <1.5% (no-load)

  • Sustained Short Circuit Current: >300% rated current for 10 seconds

  • Efficiency: 95.3–96.3% depending on frequency and load

  • Overload Capacity: 110% for one hour in six hours

  • Telephone Harmonic Factor (THF): <2%

  • Telephone Interference Factor (TIF): <50

  • Short Circuit Ratio (1/Xd): 0.14 typical

  • Power Ratings (Winding 311):

    • 50 Hz: 1525–2280 kVA (Efficiency 95.8–96.3%)

    • 60 Hz: 1668–2869 kVA (Efficiency 95.3–95.9%)

  • Reactances (Per Unit at Rated kVA):

    • Xd (Synchronous): 2.55–3.60

    • X’d (Transient): 0.20–0.25

    • X’’d (Subtransient): 0.07–0.08

    • Xq (Quadrature): 2.17–3.57

    • X’’q (Quadrature Subtransient): 0.20–0.24

    • X₂ (Negative Sequence): 0.13–0.15

    • X₀ (Zero Sequence): 0.03–0.04

    • Leakage Reactance (XL): 0.02–0.03

  • Time Constants:

    • Transient (T’d): 0.18 s

    • Subtransient (T’’d): 0.014 s

    • Armature (Ta): 0.063 s

    • Open Circuit Field (T’do): 3.4 s

Construction & Design

  • Insulation Class: H (125°C rise at 40°C ambient)

  • Protection: IP23 (optional IP44 with 5–10% derating)

  • Cooling: Self-ventilated air cooling

    • 50 Hz: 2.75 m³/s (5827 cfm)

    • 60 Hz: 3.5 m³/s (7417 cfm)

  • Frame: Steel structure with cast aluminum front and rear covers

  • Stator: Double-layer winding, 2/3 pitch eliminates triple harmonics

  • Rotor: Damped rotor dynamically balanced per BS6861 standards

  • Bearings:

    • Drive End: 6319 (sealed-for-life ball bearing)

    • Non-Drive End: 6232 (sealed-for-life ball bearing)

  • Overspeed Capability: 120% of rated speed (2250 rpm)

  • Leads: 12 reconnectable leads (star, delta, parallel star)

  • Inertia (WR²): 51.9–52.8 kg·m²

  • Winding Resistance:

    • Stator: 0.00082 Ω/phase (22°C, star connection)

    • Rotor: 1.87 Ω (22°C)

Dimensions & Weight

  • Rotor Weight: 1679 kg

  • Stator Weight: 1635 kg

  • Complete Alternator Weight: 4010–4168 kg

  • Shipping Weight (Crated): 4085–4168 kg

  • Packing Dimensions: 216 × 105 × 154 cm

Regulation & Control

  • Excitation System: PMG excitation with brushless AVR

  • AVR Models: MX341 (standard), MX321, SX440, SX460, AS440 (optional)

  • Voltage Regulation Accuracy: ±1.0%

  • Parallel Operation: Supported (AVR-dependent)

  • Protection Features:

    • Stator winding and bearing overheat protection

    • Anti-condensation heater (optional)

    • Low-speed voltage drop protection

  • RFI Suppression: Complies with BS EN 61000-6-2 & BS EN 61000-6-4, VDE 0875G/N

  • Standards Compliance: IEC60034, GB755, BS5000, NEMA MG1-22, CSA C22.2-100, AS1359

  • Certification: ISO9001 Quality Management System

Environmental Parameters

  • Operating Temperature: –15°C to +40°C

  • Relative Humidity: Up to 95% (non-condensing)

  • Altitude: Up to 1000 m without derating

  • Cooling Air Requirement: 2.75–3.5 m³/s depending on frequency

  • Noise & Vibration: Dynamically balanced per BS6861 mechanical standards

Performance Summary

  • Efficiency Range: 95.3–96.3%

  • Voltage Dip (Transient Load): ≤25% at 0.8 PF

  • Recovery Time: <0.5 seconds

  • Locked Rotor Motor Starting: >300% rated current

  • Applications: Prime power, standby, rental, telecom, mobile, lighting tower, refrigeration, and railway generator systems

Datasheet

Download

Related Products