Alternateur A.R.K7FS

A.R.K7FS Alternateur – Alternateur Heavy-Duty Sans Balais à Excitation PMG

L’A.R.K7FS est un alternateur synchrone triphasé sans balais, à excitation PMG, avec AVR MX321 pour une excellente stabilité de tension et réponse transitoire. Il offre une régulation ±1 %, un THD < 5 % et un rendement jusqu’à 96,5 %, assurant une alimentation propre et fiable pour les systèmes industriels, de location et secours heavy-duty. Sa classe H, sa protection IP23 et ses roulements étanches garantissent une résistance mécanique élevée et une maintenance réduite.

Demander un devis

Alternator Model

A.R.K7FS

50Hz (kVA)

1650

60Hz (kVA)

1935
Système d’excitationSELF EXCITED
A.V.R. MX341 WITH PMG
Régulation de tension à régime établi ± 1.0 %
Court-circuit prolongé >300% OF RATED CURRENT
Facteur de puissance nominal 0.8

Electrical Performance

  • Type: Three-phase, brushless, PMG-excited synchronous alternator

  • Frequency: 50 / 60 Hz

  • Power Factor: 0.8

  • Voltage Range: 380/220V – 480/277V (configurable in star, delta, or parallel star)

  • Voltage Regulation: ±1.0%

  • Total Harmonic Distortion (THD): <5% (balanced linear load), <1.5% (no-load)

  • Sustained Short Circuit Current: >300% rated current for 10 seconds

  • Efficiency: Up to 96.5%

  • Overload Capacity: 110% for one hour in a six-hour cycle

  • Telephone Harmonic Factor (THF): <2%

  • Telephone Interference Factor (TIF): <50

  • Short Circuit Ratio (1/Xd): 0.18

  • Reactances (Per Unit at Rated kVA):

    • Xd (Synchronous): 3.12

    • X’d (Transient): 0.18

    • X’’d (Subtransient): 0.13

    • Xq (Quadrature): 3.45

    • X’’q (Quadrature Subtransient): 0.23

    • X₂ (Negative Sequence): 0.16

    • X₀ (Zero Sequence): 0.04

    • Leakage Reactance (XL): 0.03

  • Time Constants:

    • Transient (T’d): 0.22 s

    • Subtransient (T’’d): 0.02 s

    • Armature (Ta): 0.02 s

    • Open Circuit Field (T’do): 2.25 s

  • Voltage Regulation Accuracy: ±1.0%

  • Waveform Distortion: <1.5% (no-load), <5.0% (balanced linear load)

  • Sustained Short Circuit Strength: >300% rated current for 10 seconds

Construction & Design

  • Insulation Class: H (125°C rise at 40°C ambient)

  • Protection: IP23 (optional IP44 with 5–10% power reduction)

  • Cooling: Self-ventilated air cooling system

    • 50 Hz: 2.69 m³/s (5700 cfm)

    • 60 Hz: 3.45 m³/s (7300 cfm)

  • Frame: Rigid steel structure with cast aluminum covers

  • Stator: Double-layer winding, 2/3 pitch eliminates 3rd, 9th, and 15th harmonics

  • Rotor: Damped rotor dynamically balanced per BS6861 standards

  • Bearings:

    • Drive End: 6319 (ISO standard, sealed-for-life ball bearing)

    • Non-Drive End: 6228 (ISO standard, sealed-for-life ball bearing)

  • Overspeed Capability: 120% of rated speed (2250 rpm)

  • Leads: 12 reconnectable leads (star, delta, or parallel star configuration)

  • Inertia (WR²): 40.22–41.22 kg·m²

  • Winding Resistance:

    • Stator: 0.00114 Ω/phase (22°C, star connection)

    • Rotor: 1.98 Ω (22°C)

Dimensions & Weight

  • Wound Rotor Weight: 1321 kg

  • Wound Stator Weight: 1619 kg

  • Total Alternator Weight: 3267–3391 kg

  • Shipping Weight (Crated): 3318–3391 kg

  • Packing Dimensions: 216 × 105 × 154 cm

Regulation & Control

  • Excitation System: PMG excitation with brushless AVR

  • AVR Models: MX321 (standard), MX341, SX460, SX440, AS440 (optional)

  • Voltage Regulation Accuracy: ±1.0%

  • Parallel Operation: Supported (AVR-dependent)

  • Protection Features:

    • Stator winding and bearing overheat protection

    • Anti-condensation heater (optional)

    • Low-speed voltage drop protection

  • RFI Suppression: Complies with BS EN 61000-6-2 & BS EN 61000-6-4, VDE 0875G/N

  • Standards Compliance: IEC60034, GB755, BS5000, NEMA MG1-22, CSA C22.2-100, AS1359

  • Certification: ISO9001 Quality Management System

Environmental Parameters

  • Operating Temperature: –15°C to +40°C

  • Relative Humidity: Up to 95% (non-condensing)

  • Altitude: Up to 1000 m without derating

  • Cooling Air Requirement: 2.69–3.45 m³/s depending on frequency

  • Noise & Vibration: Balanced per BS6861 mechanical standards

Performance Summary

  • Efficiency Range: 96.0–96.5%

  • Voltage Dip (Transient Load): ≤25% at 0.8 PF

  • Recovery Time: <0.5 seconds

  • Locked Rotor Motor Starting: >300% rated current

  • Applications: Prime power, standby, rental, telecom, mobile, lighting tower, railway, and refrigeration generator systems

Datasheet

Download

Produits associés